Matching the 12 x 2.5" (A4) templates to the icing sheet

If you are printing on the 12 x 2.5" pre-cut icing sheet, there is not a clear solution to print to the very edge of the right hand side topper, since the margin is too tight on the edge for most printers (see example- photo credit Daniela Miragliaā€ˇ).

One solution, if you are on the Grow plan or higher, is to design a template which has a slightly smaller circle across each topper, meaning that there will be a little white space around the inside of the circle, but also means that there will be no vertical line.

If you have any more questions about this, drop us a note at support@topperoo.com

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.